Joab EcoDrive LA Operation And Maintenance Manual Download Page 69

Page: 69 / 89

Service and Maintenance

To prevent unnecessary wear, it is important to maintain the hooklift continuously. Provided
below is information regarding daily maintenance and servicing.

Daily Maintenance

Daily care, which only takes a few minutes, can prolong the service life of your hooklift.

Provided below are some daily steps to help maintain the hooklift.

Check the oil level.

Make sure that there are no trapped pipes
or hoses. And that they are free from dam-
age or leaks.

Make sure that there are no fallen objects
in between the hooklift’s different parts.

Check that the hooklift is free from deform-
ation and cracks.

EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04

Summary of Contents for EcoDrive LA


























































































Search results

Summary of Contents for EcoDrive LA

Reviews:

Related manuals for EcoDrive LA

Brands by name

Popular brands

Joab EcoDrive LA, Operation And Maintenance Manual

Search results

Summary of Contents for EcoDrive LA

Reviews:

Related manuals for EcoDrive LA

Brands by name

Popular brands