Joab EcoDrive LA, Operation And Maintenance Manual

Page: 19 / 89

11
Operation
This chapter explains the operation and control of the EcoDrive Hook-Lift using the CBW con-
troller, that is located inside the cab.
The hooklift can also be controlled with the use of JOAB's radio controller or wired remote con-
troller. These are not standard equipment and must be ordered as an extra option. For further
information regarding the radio controller see
"Radio Controllers", on page 35 .
CBW Controller
The CBW controller has both a display and control-
stick, as shown, and is used to control all functions
of the hooklift.
To watch a video of the controller in use, click the fol-
lowing link:
video .
Certain functions, such as the operation of the
hydraulic pump, can be installed on the cab instru-
ment panel, either in addition or separate from the
CBW controller, as required.
The CBW controller has the following main parts:
1. Emergency Stop
2. User Interface
3. Control stick
4. Mounting bracket
5. Screen lock screw
The emergency stop button is used in case of an emergency. Once pressed, all functions of
the hooklift that could cause injury are disabled. For further information regarding the emer-
gency stop, refer to
"Emergency Stop", on page 20 .
The user interface of the CBW controller has a 2.8 inch colour display. It is configurable. It is
possible to display one of five different page setups. Each page setup can have six user
defined functions, such as turning lights on. For further information see
"Page Setups", on
page 14 .
If the PTO is tuned off, the display will also turn off. However, if there are any active warnings
the display will show the warnings (refer also to
"Warnings", on page 16 ).
The control-stick is used to control the basic functions of the hooklift, such as tipping. For
detailed information regarding its function, refer to
"Control Stick Function", on page 17 .
EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04