Joab EcoDrive LA, Operation And Maintenance Manual

Page: 63 / 89

55
Shunting a Body
The operator of the hook-lift is responsible for handling it. Care must be taken to
avoid injury or damage. Before operating the hook-lift make sure that you have read
and are fully aware of the warnings in this manual and on the hook-lift.
FFD (Friction Free Drive) must be deactivated before loading a body that has dowel
pins or an internal-mechanical-lock. Dowel pins are used to anchor a body onto the
vehicle, such as a crane lift. An internal-mechanical-lock is used to lock a body onto
the vehicle. Damage will occur if FFD is active. Press the following icon
to deac-
tivate FFD.
To shunt a body from a trailer follow the procedure listed below:
1. Make sure that there is nobody within the working area of the vehicle and the body.
2. If the vehicle is fitted with an extendable underrun - retract it. Refer to "Extendable Under-
run Protection", on page 32 .
3. If the vehicle has retractable axles, make
sure that they are lowered.
4. Start the hydraulic pump. Once the pump
is started, the pump icon will be displayed
in the CBW controller as shown.
For information regarding the starting of
the pump, refer to
"User Interface", on
page 12 .
5. Open the hydraulic-lock.
EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04