Joab EcoDrive LA, Operation And Maintenance Manual

Page: 23 / 89

Icon Description Icon Description
Trailer setup Hook positioning display
Table 3: Page setups (continued)
To switch between these page setups, simply press either the left or right arrow button below
the display.
The number of menu page setups that are accessible via the left and right arrow buttons can
be configured as required (1–5 page setups). In the example shown below, three page setup
are selected, these are shown with a green rectangle below them. The three active page
setups will be visible when the left/right arrow buttons are pressed.
To configure which of the page setups are available when the left and right arrow buttons are
pressed, follow the procedure below:
1. Press and hold down the OK button and
press either the left or right arrow button
at the same time for a few seconds.
The screen will then display the menu
page options as shown.
2. Select the desired page setup from those
displayed and then press the OK button
to either activate it or de-activate it (active page setups have a green rectangle below
them).
3. Press and hold down the OK button for a few second to save the new settings.
Hook Positioning
The hook position page option displays the
position of the hook. This is an optional extra.
For it to work, an additional sensor must be
installed on the hooklift.
As shown opposite, the position of the hook
and its angle are displayed in the user inter-
face whenever this menu page is selected
(see also
"Page Setups", on page 14 ).
NOTE: This function is dependent on the hook-
lift's sensors. If the sensors malfunction or
they are incorrectly positioned, the information
displayed in the user interface will be incor-
rect. The actual information provided should
be seen as an approximation and not an exact
value.
15
Operation | CBW controller
EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04