JMP FOX 4000 H, Operation Instructions Manual

Page: 5 / 62

3
2. Installation protocol
This sheet should be filled in completely and signed following completion of installation.
The protocol should be filled in by the competent service technician and faxed to the Matthies workshop
service (040 / 73 44 17 - 199). The original must be retained in the inspection logbook.
Johannes J. Matthies GmbH & Co. KG
Hammerbrookstraße 97
20097 Hamburg
Installation protocol
The verhicle lift JMP FOX 4000 H
with the serial number ...................................... was installed on ......................................
by the company ............................................... in .............................................................
It has been inspected with regard to function and safety and commissioned. Installation was realised by the ope-
rator/competent person (strike out inapplicable).
Following the conclusion of function and safety testing by a trained service technician, the lift is transferred to the
on-site electric power supply without an electrical connection (e.g. plug). An electrical connection is to be esta-
blished on site between the lift and the electric power supply by a qualified electrician (see details in electrical
diagram).
The operator confirms the proper installation of the lift, that all information in these operating instructions and the
inspection logbook has been read and appropriately observed and that this document is kept at all times where it
is accessible to operating personnel.
The competent person confirms the proper installation of the lift, that all information in these operating instructions
and the inspection logbook has been read and that the documents have been handed over to the operator.
Anchoring dowels used: ........................................................... (type/brand)
Minimum anchoring depth observed: ....................................... mm

ok
Tightening torque observed: ..................................................... mm  ok
...................................... ..................................................... .........................................
Date Name, operator & company stamp Signature of operator
...................................... ..................................................... .........................................
Date Name, operator & company stamp Signature of competent
Servicepartner ....................................................................................................... (Stamp)
Vehicle lift status 04/2015 Operation instructions status 04/2015