55
Fill in and retain in inspection logbook.
Serial number:
Check item
Okay
Deficiency
Missing
Review
Comment
Type plate
Brief instructions operation
Warning
Visual inspection of welds
Function button “Raise”
Function lever “Lower”
Function button “Unlock catch”
Function limit deactivation
Function support arm lock
General condition of lift
Condition and securing of pins
Function “Up Off”
Support structure (warping, cracks)
Tightening torque of fastening screws
Firm fitting of all supporting screws
Condition of power unit
Surface condition of piston rods
Condition of covers
Tightness of hydraulic system
Level of hydraulic oil
Condition of hydraulic lines
Condition of electrical cables
Condition of paint finish
Condition of synchronisation cables
Condition of pulleys
Condition of support arms
Condition of carrying plates
Function test with vehicle
Condition of concrete floor
(Tick off applicable, additional tick if review is necessary!)
Safety inspection conducted on: .....................................................................................................................
Conducted by company: .................................................................................................................................
Name, signature of competent person: ............................................................................................................
Result of inspection:
Further operation dubious, review necessary
Further operation possible, remedy deficiencies
No deficiencies, no objection to further operation
.............................................................. .................................................................................
Signature of competent person Signature of operator
If remedying of deficiencies is necessary:
.............................................................. .................................................................................
Deficiency remedied on Signature of operator
(Use a new form for the review!)
Summary of Contents for FOX 4000 H
