JLG 530LRT, Service And Maintenance Manual

Page: 97 / 262

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121781 3-55
3.13 HYDRAULIC TANK
REMOVAL
NOTE: It is recommended to remove the side compartment
cover before attempting to remove the hydraulic
tank (refer to Section 3.9, Side Compartment Covers).
1. Disable machine operation.
2. Drain hydraulic fluid from hydraulic tank (1) by open-
ing the drain plug (2). Store hydraulic fluid in appro-
priate receptacle.
3. Disconnect, cap and label all hoses connected to
tank.
4. Remove the bolts, washers, and nuts (3) attaching
the hydraulic tank to the machine. Remove tank from
machine.
NOTE: Hydraulic tank has two lifting lugs on the top corners
for lifting.
Empty tank weighs approximately 105 lbs (47.6 kg).
INSTALLATION
1. Follow Removal Steps in reverse.
2. Ensure drain plug (2) is tight. Refill hydraulic tank (1)
with 34 gal (128.7 l) hydraulic fluid.
1. Hydraulic Tank
2. Tank Drain 3. Tank Mounting Bolts/Nuts and Washers
Figure 3-46. Hydraulic Tank Removal
1