JLG 530LRT, Service And Maintenance Manual, Page: 93 / 262

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121781 3-51
Ground Control Station Components
DISASSEMBLY
1. Disconnect the harnesses from the ground control
box (1).
2. Open the lid (2) to gain access to components inside
the ground control box.
3. Disconnect any wires and/or plugs from damaged
components (3 or 4).
4. Remove and replace components if necessary.
ASSEMBLY
1. Reattach any wires and/or plugs.
2. Close lid (2) and secure.
3. Reattach machine harnesses to the ground control
box (5).
NOTE: If Chassis tilt sensor or the ground control station
box is remo.ved and replaced, the Chassis tilt sensor
must be calibrated (refer to Section 5.4, Location Of
Additional Sensors).
1
3
2
4
5
MAF04180
1. Ground Control Box
2. Lid
3. Circuit Board 4. Chassis Tilt Sensor
5. Machine Harness Connectors
Figure 3-42. Ground Control Station Components