JLG 530LRT, Service And Maintenance Manual, Page: 240 / 262

SECTION 7 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
7-6 3121781
Deutsch HD, DT, DTM, DRC Series
The Deutsch connector system is commonly used for harsh
environment interconnect. Follow the installation instructions.
AMP Seal
The AMP Seal connector system is used on the Control ADE
Platform and Ground Modules.
Apply dielectric grease to the plug/male connector housing
which typically contains socket contacts/female terminals. If
trapped air prevents the connector from latching, pierce one
of the unused wire seals. After assembly, install a seal plug (JLG
#4460905) in that location to prevent moisture ingress.
Note that seal plugs may be installed by the wire harness man-
ufacturer if an unused wire seal becomes compromised (wire
inserted in the wrong cavity during assembly and then cor-
rected).
AMP Mate-N-Lok
This connector system is widely used inside enclosures for
general-purpose interconnect. Follow the general guidance
for installation.
Figure 7-5. Application to Plug/Male Contacts
Figure 7-6. Use of Seal Plugs
MAF01570