JING JIE UniPBX-2000, Administrative Manual

Page: 94 / 219

94
Parameter
Name
Description
Incoming Call
Blocking When it is checked, the incoming call will be filtered by
matching the "calling party number" with "Incoming call
blocking list". If it is matched, the call will be rejected.
Outgoing Call
Blocking When it is checked, the dialed number will be filtered by
"Outgoing Call Blocking List". If the leading pattern was
matched the list, the call will be rejected.
Do Not Disturb Enable Do Not Disturb or not. When DND is enabled, the
desired period for DND should be defined.
Anonymous Call
Blocking When the incoming call doesn't include the caller ID,
whether to reject it or not.
Email Missed Call If the extension is unable to take the call, whether to send a
email to extension owner or not.
Set SIP TO as
Request URI Make sure to set the SIP TO header is same as Request
URI if it is checked.
Response through
Via (UDP only) Send the SIP response message back to the top via
instead of using the registered ports.
Disable
Authentication qop
Tag Whether to send qop tag for SIP authentication (401/407)
or not.
Monitor Register
Status If it is check, the system will report the device status. If it is
not registered or re-registered, a record will be written to
Extension Status Detail for tracking. It is useful if
administrator would like to keep the watch of this
extension.
Allow IP Surveillance
Audio Allow 2 way voice (audio) to SIP surveillance camera or
not. This option is only available when surveillance module
is installed.
Enable V4/V6 302 Whether enable v4/v6 302 moved or not? This can be
applied only for a V4/V6 dual stack CPE device. The
default is disabled since the system will do the V4/V6
traversal automatically.
Unique SIP Call ID Whether enable the Unique SIP call ID for each call or not.
It is related to parallel ringing case. The device might
reject the second call when using same SIP call ID.
Please contact FAE for usage. The default is OFF.