JING JIE UniPBX-2000, Administrative Manual

Page: 115 / 219

Using the System
115
Parameter
Name
Description
Mode Activate this digit manipulation group or not
Pilot Number The leading number (prefix) to be matched
Incoming
Number Type The incoming number type to be matched. It could be calling
number (ANI) or called number (DNIS). For most of case, the
DM incoming type will be DNIS.
Applied Number
Type The target to be manipulated. It could be calling number (ANI)
or called number (DNIS). For most of case, the applied number
type is DNIS.
Length If the length is greater than 0, it means the incoming number
requires to have the same length. If it is equal to 0, length
mating will be ignored.
Applied
Extension Target When it is set to "caller", this DM will be applied when the
extension is making the call out. When it is set to "called", the
DM will be applied when the extension has been selected to be
called. When it is set to "Both", the DM will be applied when
the extension is calling and called. For normal case, it should
be set to "caller".
Start Position The start position to be replaced. Before the first digit, the
position is 0. Between digit 1 and digit 2, the position is 1 and
so on. If the position is greater than the digit length, it indicates
after last digit.
Stop Position The stop position to be replaced. Before the first digit, the
position is 0. Between digit 1 and digit 2, the position is 1 and
so on. If the position is greater than the digit length, it indicates
after last digit.
Replace Value The value to be placed after remove the digit in between start
and stop position. You can keep it empty if only required to
delete those digits in between start and stop.
The following are the examples of the DM rule:
Number to be DM: 1234567, Start position: 0, stop position: 0,
Replaced value: "002", DM result: 0021234567.
Number to be DM: 1234567, start position: 2, stop position: 6,
replaced value: "002", DM result:120027
Number to be DM: 1234567, start position: 24, stop position:
24, replace value: "002", DM result: 1234567002.
Number to be DM: 1234567, start position: 1, stop position: 2,
replaced value: "", DM result:134567.