Getting Start
25
P a r a m e te r
Na m e
Value
Name
1004
Description
My VOIP Carrier Extension
Click
Apply
to save it.
Click
COMMIT
to take effective and verify the FXO is registered or not by using the
extension status as the description in "Verify the Device Register".
1.13
Create Routing Plan
Assume the following is the dialing rule for PSTN gateway or VOIP Carrier
Leading 0 is used to indicate this call is to PSTN gateway or VOIP carrier.
Leading 0 need to be removed before send to PSTN gateway or VOIP Carrier.
The calling example is described as below:
Extension 1001 dialed 0023123456. System will route the call to extension 1003
(PSTN gateway) or 1004 (SIP trunk). Before the system send the call out, the system
will remove the leading 0 and change the called number to 02123456.
Click
FEATURE -> Routing Plan -> New
to create a routing plan as follows:
Summary of Contents for UniPBX-2000
