Jetter AG
Mechanical installation | 5
JX3-THI2-RTD-EI User Manual
16 / 36
5.3 Dismounting the enclosure from the backplane module
The upper and lower backplane tab on the module let you pull off the enclosure
from the backplane module.
NOTICE
Mechanical damage and impaired EMC immunity
Protection class IP20 is not guaranteed when replacing JX3 modules. If you
touch the EMC clip, you may damage this clip. A damaged clip may impair noise
immunity.
●
Do not touch any electronic components after removing the enclosure from
the backplane module.
A
A
1
1
Fig. 7:
Dismounting the enclosure from the backplane module
1
DIN rail latch
A
Detail view
1.
Disconnect the system from the power supply.
2.
Press the upper and lower latches (1) on the device simultaneously.
3.
Keep the latches pressed and pull off the enclosure.