Jetter AG
Mechanical installation | 5
JX3-THI2-RTD-EI User Manual
14 / 36
5 Mechanical installation
5.1 Installing the expansion module on the DIN rail
NOTICE
Functional impairment caused by unfavorable installation
●
Install the device only in vertical position on the DIN rail.
●
Keep the minimum distance to surrounding parts.
1
2
3
3
Fig. 5:
Installing the expansion module on the DIN rail
1
DIN rail
2
Upper DIN rail latch
3
Minimum distance to surrounding parts = 30 mm
1.
Disconnect the system from the power supply.
2.
Place the upper latch (2) in angled position on the DIN rail (1).
3.
Snap the lower latch of the device onto the lower edge of the DIN rail.
4.
Slide the device to its intended position.