Jetter JX2-IO16, User Manual

Page: 119 / 124

JX2-IO16 Appendix
Jetter AG 119
Appendix D: List of Illustrations
Fig. 1: Shielding of SUB-D connectors in conformity with EMC standards. 16
Fig. 2: Shielding of screw terminals in conformity with the EMC standards. 16
Fig. 3: Front View - JX2-IO16 23
Fig. 4: Side View - JX2-IO16 23
Fig. 5: Top View JX2-IO16 24
Fig. 6: Digital Inputs - Current voltage characteristic 31
Fig. 7: JX2-IO16 Module: Sample circuitry 37
Fig. 8: Power Supply 38
Fig. 9: Power LED 40
Fig. 10: Digital Inputs 41
Fig. 11: Shielding the single-channel counter connection 43
Fig. 12: Connecting an incremental encoder 44
Fig. 13: LEDs of the Digital Inputs 45
Fig. 14: Digital Outputs 46
Fig. 15: Example: Emergency Stop Circuit of Outputs 49
Fig. 16: LEDs of the Digital Outputs 50
Fig. 17: System bus 51
Fig. 18: Status LEDs 54
Fig. 19: Generating the pulse stretching 70
Fig. 20: Effect of pulse stretching of 100 ms with rising edge 70
Fig. 21: Effect of pulse stretching with two short signals 70
Fig. 22: Effect of pulse stretching with a signal of longer duration 71
Fig. 23: Generating the single-channel counter pulse 84
Fig. 24: Counting with rising edge 85
Fig. 25: Counting with pulse stretching 85
Fig. 26: Example: Single-channel counter 86
Fig. 27: Evaluating a dual-channel counter signal 87
Fig. 28: Voltage levels of the undervoltage detection system 95
Fig. 29: Definition of output error statuses 96
Fig. 30: Ouput state response when restarting the module 98