Jetter JX2-IO16, User Manual

Page: 16 / 124

1 Safety Instructions JetWeb
16 Jetter AG
Fig. 1: Shielding of SUB-D connectors in conformity with EMC standards.
Fig. 2: Shielding of screw terminals in conformity with the EMC standards.
If the shield cannot be attached to the connector, for example, with a screw
type terminal:
When connecting the single-channel and dual-channel counter, make sure
that the sensor lines are properly shielded and that the shield is connected
with the greatest possible surface area.
The shield is to be connected to a separate grounding bar in close vincinity
to the input terminal (for more information refer to Fig. 2).
X21
1 2 3 4 5 6 7 8
INPUT
DC
24V
S
0V
Sensor