Jetter JX2-IO16, User Manual

Page: 57 / 124

JX2-IO16 7.1 Addressing Digital Inputs and Outputs
Jetter AG 57
7 Software Programming
7.1 Addressing Digital Inputs and
Outputs
The address is made up of the location of the module and the number of the
respective input or output.
Addressing with JC-24x / NANO-A/B/C/D controllers:
IO Number: xxzz
Meaning:
For more information, for example on register overlaying of IOs, refer to the User's
Manual supplied with the corresponding controller.
Addressing with JC-647 controllers equipped with JX6-SB(-I), or
DELTA controllers with JX6-SB(-I):
IO Number: m
1
xxzz
Meaning:
For more information, for example on register overlaying of IOs, refer to the User's
Manual that comes with the JX6-SB(-I) module.
Addressing with JC-800 controllers equipped with JX6-SB(-I):
The IO address starts with the area number 5.
x x z z
IO Number: 01...16
Module number: 02...24
x x
1
m z z
IO number: 01...16
Module number: 02...32
Submodule 1: 2...4
Input number: 52CM xxzz
Output number: 53CM xxzz