Jetter JX2-IO16, User Manual

Page: 41 / 124

JX2-IO16 6.7 Digital Inputs
Jetter AG 41
6.7 Digital Inputs
Fig. 10: Digital Inputs
6.7.1 Important information
OUTPUT
INPUT
S
0V
DC
24V
DC
24V
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
PO
WE
R
ER
R
RU
N
X31
X21
X10
X18
BUS IN
POWER
0,05A 4A
Caution
Apply a maximum voltage of 28.8 volt to the digital inputs of the JX2-IO16 module.
This will prevent the JX2-IO16 module and the sensor, e.g. an inductive limit
switch, from being destroyed.
Caution
Make sure that digital input modules are disconnected from the power supply
before inserting or removing them. When removing or inserting the module, the
supply lines as well as the signal lines must be de-energised. Otherwise the JX2-
IO16 module will be destroyed.
Caution
If a line with reverse polarity is connected to a digital input, the input will be
destroyed.