24
JETCO Torque Transducer Information (transducers sold separately):
Sensor Material:
4140 High Modulus Alloy Steel
Modulus of Elasticity: 30,000000 psi
Yield Strength: 200,000 PSI
Thermal Expansion: 6.5 ppm/ Degree F
Density: .283 lb/in3
Hardness: 42-48 Rc
Torque Sensor Housing:
Material: 6061 Aluminum
Finish: Clear or Colored Anodize
Adapter (female x female) Material:
4140 Heat Treated High Alloy Steel
Finish: Black Oxide Standard
Tansducer Cable:
4 ft. long 10 wire, shielded cable with 10 pin stewart connector and protective boot.
Dallas Semiconductor 2430 2 wire memory chip installed in each transducer programmed with the following data:
CW mv/v at full scale and 10% of full scale
CCW mv/v at full scale and 10% of full scale
Full Scale Range
Default (calibrated) Units
Other information relative to the transducer.
Transducer Base (Bench Mount Version)
Base: Plain Carbon Steel
Finish: Black Oxide or Nickel Chrome (Alloy Steel)
Strain Gages: Full Wheatstone Bridge Configuration with placement to minimize side load effects.
350 Ohm Bridge Resistance
Output: 2mv/v (approx)
Excitation: 6 volts (approx)
Microstrain: 1000 (approx)
Sensitivity: 2mv/v (approx)
Overload without damage: 150% of full scale
Accuracy: See specifications sheet
Meter Kit Spare Parts:
Description
JETCO Part Number
Case-Enclosure Z5
81-0040
Screws, Enclosure
220251
Bezel, LCD cover
810041-3
Keypad
810043-2
PCB Assembly
810044
LCD
810023
Battery, 9 Volt
45-0001
Stand, Adjustable
810046
Cable, Rs232
065150
Adapter, Serial-RJ6 Rs232
772084
Power Supply, 9V, 300mAh
97-0002
Cable, Transducer (up to 600 ft.lb.)
29-2000
Cable, Transducer (1000 and 2000 ft.lb.)
29-2000-BENDIX
Box, Shipping
605103
Foam Insert (fits 605103 box)
605104
25
Summary of Contents for TTS-1000
Page 1: ...1 TS 1000 TTS 1000 Torque Tester Operation Manual Rev 2 2008...
Page 29: ......
