Introduction
The JETCO Electronic Torque Meter is a highly accurate torque analyzer and
production tool. Use it as a high end torque calibrator or bring it to the work
site to accurately apply torque to fasteners.
With the JETCO Electronic Torque Meter you only have to buy one electronic
module. Simply add ranges as you need them by purchasing additional
torque transducers.
This meter uses the very latest in computer technology including a small
microchip installed on each transducer for true “plug and play” recognition of
the attached torque sensor. Simply attach the transducer, turn the unit on and
you are ready to go to work.
A full compliment of modes and functions combined with an easy to use
interface make this torque meter the perfect device for all torque applications.
There are some very special features inside of this meter that distinguish it
from the competition. For example, there is a “first peak” mode that allows
you to test and calibrate micrometer (clicking) type torque wrenches.
However, just having this software mode is not enough, you must also have
circuitry that is fast enough to capture the fast “click” of a torque wrench or
the ultra fast torque peaks of DC tools and pulse tools when in peak mode
(always use a joint rate simulator when testing power tools, joint rate
simulators simulate the actual torque application with springs).
The sampling rate of this torque meter is over 8,000 samples per second
rivaling any torque data acquisition system.
Memory for up to 1350 torque data combined with a direct rs232c com port
make this small unit a powerful data acquisition system.
Additionally, the torque meter has an industry leading triple 4 digit numeric
display that shows you the limits settings at all times and prompts you with
information during set-up.
These features combines with many other useful functions will make this the
last electronic torque meter you will ever need!
2
Table of Contents
Feature Overview....4
Keypad functions.....5
General Operation
Suggested
mounting
positions....6
Quick Start....7
To change the
mode
of operation....7
To change the
units
of measure....7
To turn
limits
on/off....7
To set a new
target torque
when % is the default.....8
To
recall
the last cleared torque....8
To
save
a torque value to memory....8
To view the attached
transducer information
....8
Menu Functions
To enter the
menu mode
....9
To
recall memory....
9
To
send memory
to a printer or computer....10
To
erase memory
....10
To
set filters
....10
To change the
% tolerance value
....11
To make
high low
limits
the default tolerance method....11
To change the
display clear (reset)
method....12
Entering the limits value....12
Power Standby Mode
....12
Entering Numbers
....13
Zeroing the Display
....13
Torque Sensors (transducers) and Overload
....14
Transducer Mounting Positions
....15
Checking for Accuracy
....16
Calibrating and bypassing the smart transducer calibration data
....18
Selecting Custom Transducers
....20
Printing and Sending Data
....20
Battery and Power
....21
Specifications
....22
TroubleShooting...23
Spare Parts....24
Transducer Information and Specifications ....25
Safety Warnings....28
3
Summary of Contents for TTS-1000
Page 1: ...1 TS 1000 TTS 1000 Torque Tester Operation Manual Rev 2 2008...
Page 29: ......
