The monitor in Ocean Pearls was
designed to slide in and out through
two different access points - the left or
the right side. All monitor connections
are on the left side (facing the
machine). Turn the machine OFF and
unplug it from the wall outlet. Remove
the metal access panel to gain access
to the monitor connections. There are
four connections that must be
unplugged. These connections must
be carefully unplugged since it might
be very easy to bend the connection
pins if you pull them off too hard, too
fast or at an angle.
Step # 5
Unplugging the upper monitor connections
CAREFULLY remove both connections
for the upper monitor. Take great care
not to bend any pins by pulling the
upper monitor connector # 1off at an
angle. Slowly pull the connector
straight back and GENTLY lay it to the
side. Repeat the same step with the
upper monitor connector # 2.
CHANGING MOTORS ON THE EEL OR PELICAN BONUS
Step # 3
Removing the left monitor access panel
Jennison Entertainment Technologies
Ocean Pearls Service Manual
Page 109
