INSTALLATION INSTRUCTIONS
Step # 5-A
The wires will be stored in the bottom part of Section # 3. You may
need to reach your hand up through the access hole and pull both sets
of wires down through the hole.
Check Box When This Step is Complete
Step # 5-B
Pull both connectors down through the access door. Be careful not to
pull too tight in case the wire is caught on something.
Check Box When This Step is Complete
Step # 5-C
Connect both Molex connections as shown in the photo and carefully
pull the wire out of the way of the elevator arms by using the
bendable wire clip. Ensure that there is enough clearance on the wires
by manually moving the elevator up and checking that the metal arms
do not come close to touching the wires.
Check Box When This Step is Complete
Jennison Entertainment Technologies
Ocean Pearls Service Manual
Page 32
