Jet JTS-315LA, Operating Instructions Manual

Page: 75 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 35 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict
23 SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS P
23.1 Type of connection Plug fixed on the machine
frame functioned as an
appliance inlet. P
Prevention of replacebility of power supply cord
type M with type X N/A
Accessibility of appliance inlet P
23.2 Non detachable flexible cables and cords P
Type H07RN-F P
Green/yellow insulation of earthing conductor Provided P
Supply cords of tools intended to be connected to
a water supply shall not be lighter than ordinary
polychloroprene-sheathed flexible cord (code
designation H05 RN-F). N/A
23.3 Plug according to IEC60083 and EN60309-1/-2 The plug is approved according
to VDE 0620-1 for single phase
models and EN60309-1/-2 for
other models. P
23.4 Cross-sectional area of flexible cables and cords 1.5mm
2
P
23.5 Cord anchorage No cord anchorage for external
cable provided on the machine. N/A
Strain relief for type X flexible cables N/A
Cord anchorage of power supply cords of class II
tools N/A
Strain on earthing conductor of class I power cord N/A
Cord anchorage in tools others than class II N/A
Cord anchorage of type X cords N/A
Replacibility of cord anchorage of type X cords N/A
Screws operated when replacing the power supply N/A
22.6 Capacitor between contacts of thermal cut-outs P
22.7 Components for basic radio and interference
suppression N/A
22.8 Inductors for basic radio and interference
suppression inserted in the earthing circuit N/A
Testing of inductors ................................................. : N/A
22.9 Appliance couplers N/A