Jet JTS-315LA, Operating Instructions Manual

Page: 68 / 141

Test Report No.: No.: 17706687 001
Part II of II
Page 28 of 63
EN 61029-1:2009+A11
Clause Requirement

Test Result - Remark Verdict
appreciable extent and that there is no trace of
water on insulation for which creepage distances
are specified in 27.1.
15 INSULATION RESISTANCE AND ELECTRIC STRENGTH TEST P
15.1 Adequate insulation resistance and electric
strength See below P
Test conditions Cold tool, after humidity
treatment. P
15.2 Insulation resistance See below P
Limits for insulation resistance See below P
Measurement of insulation resistance .....................: Limit:
TS-315D:
Live part - Tool enclosure:
7M

.
Live part - Switch button: 7M

Live part - Saw blade: 7M

Inner and outer surface of
switch box: 5M

All measured values exceed
100 M

.
P
15.3 Electric strength See below P
Electric strength test .................................................: The electric strength test is
carried out at the followed
locations:
TS-315D:
L/N- Tool enclosure: 3750V.
L/N- Switch button: 3750V.
L/N- Saw blade: 3750V.
Inner and outer surface of
switch box: 2500V
Series point to motor
enclosure: (1000+2x282)V
TS-315G:
L1/L2/L3 - Tool enclosure:
3750V
L1/L2/L3 - Switch button:
3750V
L1/L2/L3 - Saw blade: 3750V
Inner and outer surface of
switch box: 2500V
P
16 ENDURANCE TEST P
16.1 Tools operating in extended normal use See below P