Jet J-1600R, Operating Instructions And Parts Manual

Page: 7 / 56

7
4.0
Specifications
The JET Model J-1600R is a powerful and versatile radial arm drill press. The drill head is mounted on an arm
and can slide along the arm to position the spindle over the work piece. The arm itself can be rotated on its
support column to allow centering the spindle over the work piece.
Drilling can be performed manually or with power feed assistance. In addition, parameters of RPM, power feed
rate and drilling depth can be pre-set by the operator, using controls conveniently positioned on the drill head.
The drill has an automatic tool ejector, and hydraulic head and column clamping system.
The power train gears and spline shaft are made of high quality heat-treated and ground nickel chrome steel,
offering greater strength and smoothness to high-torque loads. The spindle is of case hardened steel and
supported by dual row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at
the top. The frame is made of Meehanite® and high-tensile strength cast iron.
A precision machined box table allows convenient positioning and clamping of smaller work pieces. The box
table can be removed from the base to allow larger workpieces to be clamped on the base itself. Both table and
base have multiple T-slots for clamping set-ups.
Model number
.......................................................................................................................................... J-1600R
(J-1600R-4 is the same machine but pre-wired for 460V operation)
Stock numbers:
J-1600R .................................................................................................................................................. 320038
J-1600R-4 .............................................................................................................................................. 320039
Head and Spindle:
Push button controls .................................................................................................................................. 110V
Spindle motor
(model J-1600R)
......................................................... TEFC Induction, 7.5 HP (5.5 kW), 3 PH,
230/460V (
pre-wired 230V
), 19/9.5 A, 60Hz
Spindle motor
(model J-1600R-4)
...................................................... TEFC Induction, 7.5 HP (5.5 kW), 3 PH,
230/460V (
pre-wired 460V
), 19/9.5 A, 60Hz
Control circuits ........................................................................................................................................... 115V
Spindle taper .............................................................................................................................................. MT-5
Spindle speeds.......................................................................................... twelve speeds, within 40-1920 RPM
Quill (spindle) travel ............................................................................................................. 14-9/16” (370 mm)
Quill (spindle) travel with powerfeed engaged ............................................................................. 13” (330 mm)
Spindle travel along arm, total.............................................................................................. 44-7/8” (1140 mm)
Feed rates (distance per revolution) .......................................................................... six at 0.003 - 0.038 in/rev
Base surface to spindle, maximum (no tooling) ......................................................................... 63” (1600 mm)
Base surface to spindle, minimum (no tooling) ............................................................................ 15” (380 mm)
Column to spindle center distance, maximum ..................................................................... 62-1/4” (1580 mm)
Column to spindle center distance, minimum ......................................................................... 13-3/8” (334mm)
Noise emission (approx. 3-1/4 ft./1m from spindle head) * ..................... 82 dB at 1500 rpm; 79 dB at 88 RPM
Arm and Column:
Column diameter .......................................................................................................................... 17” (432 mm)
Arm vertical travel on column ............................................................................................ 33-15/32”. (850 mm)
Arm elevating motor .................................................... TEFC, 2 HP (1.5 kW), 3 PH, 230/460V, 3.2/1.6A, 60Hz
Clamping motor .......................................................... TEFC, 1 HP (0.75kW), 3 PH, 230/460V, 3.2/1.6A, 60Hz
Base and Table:
Box table dimensions ..........................................................27-1/2”L x 19-3/4”W x 16”H (700 x 500 x 415 mm)
T-slots in Table (6) ............................................................ 1-1/2”W x 3/4" D, 7/8” W opening (38 x 19, 22 mm)
Base dimensions ..............................................................103-1/4”L x 40-1/4”W x 8”H (2623 x 1022 x 203mm)
T-slots in Base (3) .............................................................. 1-1/2”W x 3/4 D”, 7/8”W opening (38 x 19, 22 mm)
Additional specifications:
Coolant pump motor.................................................. TEFC, 1/8 HP (0.1kW), 3 PH, 220/440V, 0.2/0.1A, 60Hz
Machine height (floor to motor at maximum elevation) ............................................................. 125” (3175mm)
Shipping Dimensions .............................................................. 110”L x 57”W x 115”H(2794 x 1448 x 2921mm)
Net weight ........................................................................................................................... 11,000 lb / 4990 kg
Shipping weight ................................................................................................................... 11,240 lb / 5098 kg
* Measured under test conditions SS41 material, 32mm thick, Ø32mm tool.