26
5.10 World Menu
This menu is used to set the local operating altitude from sea level measured in
meters.
To set the local altitude enter the value corresponding to your local altitude, the
values are 0 through 2, the ECU measured altitude which is displayed on the
lower section of the display should be used as a reference.
Adjusting it accordingly will improve the performance and correct possible
running issues.
The ECU has built in temperature and altitude sensors; this information is to be
taken just as reference only.
The last line is the calculated expected performance of the turbine under these
conditions.
5.11 Memory Menu
The Memory menu is used to download Turbine performance flight data to a
user supplied micro SD card. The choices consist of: Last Flight, Last 2 Flights,
1 Hour Flight data, or 2 Hours of Flight data.
The “Download Parameters” function is useful to make a back-up copy of the turbine parameters.
Additionally if there are running issues which require special factory parameter changes the
parameters can be emailed to Jet Central for analysis, the new revised parameters can be sent
back for uploading into the POWERPACK/ECU using the “Upload Parameters” function.
5.11.1 Using the micro SD Card
The recommended micro SD card size is 512 mb or larger. To download files from the POWERPACK
insert the user supplied micro SD card with the gold contacts facing towards the top of the Power Pak.
To remove the micro SD card from the POWERPACK, push in and release, and it will eject.
See section 12 for details about the operation of the PC program Jet Central BB to view the recorded
flights. Insert your micro SD card into an appropriate reader connected to your PC to read the files that
were downloaded from the POWERPACK.
Summary of Contents for Rabbit KS 100 SE Series
Page 1: ...Revision 0 2 February 2016 SE series ...
Page 14: ...13 4 Turbine System ...
Page 40: ...39 Appendix A Thrust Graph ...
Page 42: ...41 Appendix C Pipe Gaps ...