Jet Central Rabbit KS 100 SE Series, Operation And Maintenance Manual, Page: 15 / 43

14
4.1 Connections to SE POWERPACK / ECU

Throttle input from the receiver: JR type servo cable

Deans Style Battery input

S-BUS Multiplex connector

S-Bus Hand Data Terminal / S-Bus Telemetry Interface / Sensor Interface

6 mm Fuel line inlet

4 mm Fuel Line Outlet

3 mm Burner Fuel Outlet
Connect the cables to their assigned places, Caution: some of the JR type connectors used can be
connected in the wrong location or inverted, please double check all connections with the included
drawing.
Use the colored labels on the POWERPACK body to connect the connectors to their assigned position.
The input / output connectors have been designed to prevent damage to the internal circuitry in the case
of an incorrect connection.