![background image](http://html1.mh-extra.com/html/magnetic-racing/013/013_how-to-assemble_3572990001.webp)
How to assemble the Race Headquarters
We will begin by building the inner walls and then add then work our
way upwards. We leave the stairs and hand rails until last as these
are the most delicate parts. We recommend super glue as this is
quick and makes a strong model.
To begin locate the lower floor. This has "MAGNETIC RACING"
etched on it. Place this on the workbench with the text facing
upwards. Now locate the two inner walls. These are identical to each
other. Apply some small drops of super glue on the lower edge and
push them into the slots. Use another square part of the kit to get
them perfectly vertical. Hold each in place until the glue holds them.
Next we add on the front inner wall. This can be recognized as it has
a large double width door and two windows with small windows. It is
important especially with large pieces in the to do a trial fit without
glue. The parts are generally very accurate, but depending on how
they are assembled may need a little gentle sanding to make them
easy to assemble. Once you are happy, apply small drops of super
glue on the mating faces and press the part home. Make sure it is
fully pressed down into the lower piece and against the wall edges.
Summary of Contents for 013
