JESS WELDING inoMIG 350, Operating Instructions Manual

Page: 89 / 112

inoMIG 350/400/500 19 Material table
BA-0014 • 2020-06-05
EN - 35
19 Material table
The following materials are programmed in the control system by default:
*Special programs (arcs) available
1. CSt: Reduced-power, cold short arc (cold steel)
Welding with a cold arc with reduced power.
Advantages: excellent gap bridging (including vertical down), low heat input, reduced distortion. Suitable
for root welds and sheet-metal welds, including in the MIG soldering process.
2. PSt: concentrated, high-pressure spray arcs (Power Steel)
Welding with a concentrated, high-pressure arc.
Advantages: very good root and side fusion, high welding speed, low heat input. Stable and controllable
welding arc in the upper welding power range.
3. rSt: Spatter-reduced short arcs (root steel):
Welding with a concentrated, high-pressure arc
Advantages: very good root and side fusion, high welding speed, low heat input. Stable and controllable
welding arc in the upper welding power range.
Tab. 12 Material table
Material Display MC Gas Display MC Diameter (mm)
Steel* St Argon 82%, CO
2
18% – MIX 18 Ar82 0.8–1.0–1.2–1.6
Steel* St Argon 90%, CO
2
5%, O
2
5% Ar90 0.8–1.0–1.2–1.6
Steel* St CO
2
CO
2
0.8–1.0–1.2–1.6
CrNi 4316 – ER308 4316 Argon 98%, CO
2
2% – MIX 2 Ar98 0.8–1.0–1.2
CrNi 4576 4576 Argon 98%, CO
2
2% – MIX 2 Ar98 0.8–1.0–1.2
ALMG 5 ALnG Argon 100% (Ar) Ar 1.0–1.2
ALSi 5 ALSi Argon 100% (Ar) Ar 1.0–1.2
CuSi 3 CuSi Argon 100% (Ar) Ar 0.8–1.0
Metal flux-cored wire
T424 MC2 H5 nEPU Argon 82%, CO
2
18% – MIX 18 Ar82 1.2
Basic flux-cored wire
T424 BC4 H5 bASI Argon 82%, CO
2
18% – MIX 18 Ar82 1.2
Rutile flux-cored wire
T422 PC1 H5 ruti Argon 82%, CO
2
18% – MIX 18 Ar82 1.2
Material Display MC Gas Display MC Diameter (mm)
Steel CSt Argon 82%, CO
2
18% – MIX 18 Ar82 0.8–1.0–1.2
Material Display MC Gas Display MC Diameter (mm)
Steel PSt Argon 82%, CO
2
18% – MIX 18 Ar82 0.8–1.0–1.6
Material Display MC Gas Display MC Diameter (mm)
Steel rSt Argon 82%, CO
2
18% – MIX 18 Ar82 0.8–1.0–1.2