JESS WELDING inoMIG 350, Operating Instructions Manual

Page: 101 / 112

inoMIG 350/400/500 20 Spare parts list
BA-0014 • 2020-06-05
EN - 47
Tab. 18 Spare parts list for DVK4
Pos. Name Item no.
A
Hinge 40 × 40 mm 303.056.003
B Hinge plate DVK4 – 2010 715.013.211
C
Plastic handle, small 305.044.002
Torx screw PT60 271.060.001
D
MC1 control box 851.044.001
Fine-wire fuse T 6,3 A control board 464.036.010
Knob 28 mm 305.042.010
Cover for knob 305.042.011
E
7-pole Tuchel plug 410.007.111
F Right side panel DVK4 – 2010 715.013.213
G
Gas struts 303.013.010
H Wire feed motor 140 W 42 V 4-roller 454.140.023
Wire feed roller 0.8–1.0 mm 454.010.024
Wire feed roller 1.0–1.2 mm 454.012.025
Wire feed roller 1.6 mm, knurled 454.016.026
Wire feed roller, smooth – knurled 454.000.027
I
Connection plate for internal connection 715.042.041
J Current connection plate 703.011.006
K
Solenoid valve DN 2.5/42 V G 1/8 465.018.009
L PCB MC – DVV V2.00 600.044.031
M
Guide castor D75 × 22 mm 301.075.007
N Motor insulation plate DVK4 – 2010 101.013.039
O
Hoisting eye M12 D582 M12 V
P Wire-holding arbor 306.050.003
Q
Hood corner DVK4 – 2010 715.013.212
R Quick-action coupling DN 5– G 1/4 I 355.014.007
PVC washer, red 101.011.047
PVC washer, blue 101.011.048
S
Central socket, long DVK4 – 2010 425.133.010
Wire guide tube 124 mm 425.124.001
Insulating flange for Binzel central adapter 425.501.004
T Transverse handle DVK4 – 2010 715.013.127
U
Hinged hood DVK4 – 2010 715.013.210