16 | BA-40100-02-V17
TOPAX
®
DX
Multichannel controller
4.9.12 Menu 0.4.7: Combined chlorine output
(The menu is only availabe, if ON was selected for "Total chlorine input"
in menu 0.4.6)
With the arrow keys
▲
and
▼
you can select between the options:
• Pulse frequency (Optocoupler)
• Pulse frequency (relay)
• Pulse length (relay)
• Continuous output (20 mA)
• ON/OFF (relay)
• No controller function
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or
▶
. The TOPAX DX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.9.13 Menu 0.4.8: Conductivity input
With the arrow keys
▲
and
▼
you can select between the options:
• ON
• OFF
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or
▶
. The TOPAX DX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.9.14 Menu 0.4.9: Conductivity output
(The menu is only availabe, if ON was selected for "Conductivity input"
in menu 0.4.8)
With the arrow keys
▲
and
▼
you can select between the options:
• Pulse frequency (Optocoupler)
• Pulse frequency (relay)
• Pulse length (relay)
• Continuous output (20 mA)
• ON/OFF (relay)
• No controller function
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or
▶
. The TOPAX DX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.9.15 Menu 0.4.10: Flocculation pump output
With the arrow keys
▲
and
▼
you can select between the options:
• Pulse frequency (Optocoupler)
• Pulse frequency (relay)
• Pulse length (relay)
• Continuous output (20 mA)
• ON/OFF (relay)
• OFF
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or
▶
. The TOPAX DX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.9.16 Menu 0.4.11: DIN-Contact output
With the arrow keys
▲
and
▼
you can select between the options:
• Relay contact
• Optocoupler
• ECO control mode
• OFF
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or
▶
. The TOPAX DX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.9.17 Menu 0.4.12: ECO control output
With the arrow keys
▲
and
▼
you can select between the options:
• Optocoupler
• Relay contact
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or
▶
. The TOPAX DX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.9.18 Menu 0.4.13: Disturbance variable input
(The menu is only availabe, if OFF was selected for "Conductivity input"
in menu 0.4.8)
With the arrow keys
▲
and
▼
you can select between the options:
• 0...20 mA
• 4...20 mA
• OFF
The selected option is highlighted in grey. The entry is confirmed with
the “next” key or
▶
.
To go back to the previous menu, press the key "back" or
◀
.
4.9.19 Menu 0.5: Completing the configuration
The TOPAX DX moves immediately on to the configuration, at the latest
after menu 0.4.13, in the finalising menu (menu 0.5) and shows the
chosen configuration with all the previously chosen options in the total
overview.
The configuration is saved with the "save" key and the finalising con-
firmation key "OK" and the TOPAX DX moves to the next menu 0.6.1.
The configuration starts from the beginning again with the key “back”.
The TOPAX DXthen goes to menu 0.4.1.
news configuration
disinfection
potentiostat
3 point step with poti
ph value
Impulsefrequency (relais)
combined chlorine
flocculation
impulsefrequency (opto)
DIN-contact
OFF
save
impulselength (relais)
back
conductivity sensor
impulselength (relais)
0.5
REDOX
temperature
on
on
eco control
off
dist. var.
off
Fig. 16: Menu 0.5: Overview from all selected options.
A changed configuration will be displayed red.
4.9.20 Menu 0.6: Terminal connection clips
According to the chosen Options the TOPAX DX determines the relevant
terminal connections and shows this in menus 0.6.1 to 0.6.4 (each by
number of connections).
