Jesco TOPAX DX Operating Instructions Manual Download Page 15

Page: 15 / 60

BA-40100-02-V17 | 15

Operating instructions

4.9.3 Further languages - Memory card

Besides the fixed installed languages of German and English there
is other language data for the TOPAX DX. This can be written on an
external data storage unit, a Memory card, and then imported by the
TOPAX DX. For further questions regarding the availability of languages
please ask the manufacturer.
The memory card with the language data is inserted on the display board
in the upper casing (see chapter “24 Memory card” on page 54).
The additional languages are available during configuration under

⑥

(further languages “>>”).
Press the

⑥

button and select the desired language using the arrow

buttons

▲

and

▼

. Confirm with the “OK” key. The language is loaded

into TOPAX DX.

Lutz-Jesco GmbH

Am Bostelberge 19

30900 Wedemark

Tel: 05130/58 02-0

[email protected]

Fax: 05130/5802-68

http://www.jesco.de/

For help please press the “Help” button

help

0.2

TOPAX DX configuration

Fig. 15: Menu 0.2: Home page for the configuration of language choice

After having chosen the language the TOPAX DX moves to the menu
0.2. Now you can start directly with the configuration, select key

③

(“next”), and/or the Help-Menu, key

⑥

(“help”).

4.9.4 Help-Menu

The Help Menu is available as a point of help for many menu points.
By pressing a random key the TOPAX DX returns to the previous menu
again.

4.9.5 Menu 0.4: Configuration of the terminals for sensors and

actuating elements.

After having chosen the language the TOPAX DX moves to the menu
0.2. By pressing the "next" key, the TOPAX DX goes to menu 0.4.1.
The TOPAX DX checks by means of the installed components, which
connections are possible and offers per the connections presents a
choice in Options.

4.9.6 Menu 0.4.1: Input Disinfection

With the arrow keys

▲

and

▼

you can select between the following

options:
•  2-electrode measuring cell CS 120 or
•  Potentiostat (PM)
•  Diaphragm-covered measuring cell
•  Redox single-rod measuring cell
•  Total chlorine measuring cell
The selected option is highlighted in grey. The entry is confirmed with
the “next” key or

▶

. The TOPAX DX then goes to the next menu.

Note

The configuration does not run automatically
through all the menus shown here. It depends on
the configuration of the TOPAX DX on delivery.
The configuration is saved when you have gone
through all menus.

4.9.7 Menu 0.4.2: Output Disinfection

With the arrow keys

▲

and

▼

you can select between the options:

•  Servomotor with potentiometer
•  Servomotor without potentiometer
•  Pulse frequency (Optocoupler)
•  Pulse frequency (relay)
•  Pulse length (relay)
•  Continuous control output (20 mA)
•  ON/OFF (relay)
•  No controller function
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or

▶

. The TOPAX DX then goes to the next menu.

The key "back" or

◀

leads to the previous menu.

4.9.8 Menu 0.4.3: pH output

With the arrow keys

▲

and

▼

you can select between the options:

•  Servomotor with potentiometer
•  Servomotor without potentiometer
•  Pulse frequency (Optocoupler)
•  Pulse frequency (relay)
•  Pulse length (relay)
•  Continuous output (20 mA)
•  2-sides pulse frequency (relay) (Optocoupler)
•  2-sides pulse frequency (relay) (Relay)
•  2-sides pulse length (relay)
•  ON/OFF (relay)
•  No controller function
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or

▶

. The TOPAX DX then goes to the next menu.

The key "back" or

◀

leads to the previous menu.

4.9.9 Menu 0.4.4: Input Redox

With the arrow keys

▲

and

▼

you can select between the options:

• ON
• OFF
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "next" key or