SUBJECT TO TECHNICAL CHANGES.
JERGENS INC. · PHONE: 216.486.5540 · FAX: 216.481.6193 /553720 / 553721/
8
INSTALLATION MANUAL
ZPS-
K5.3,
K10.3, K20.3 CLAMPING
MODULE WITH SENSOR
MONITORING, MOUNTING FLANGE
877.426.2504
1.
Transport
Every Zero Point System (ZPS) is carefully tested before shipping. Upon
receipt of the product, please check the integrity of the packaging and
contents (subject to other instructions on the part of JERGENS INC.),
to ensure that the equipment was not damaged during transport and
that the delivery corresponds to the specification of the order. Please
report any defects or damage immediately to JERGENS INC. and
the carrier, who is liable for the transport damage.
CAUTION:
Any defects or damage must be claimed within 10 days of the receipt
of the product.
2.
Description of the system
Technical data sheet
Unit
K10.3
K20.3
Pull-in and locking force
in the system up to
kN [lbs]
10 [22
50
]
17 [382
0
]
Holding force
kN [lbs]
25 [5620]
55 [1236
0
]
Min. opening operating
Bar [psi]
5 [7
3
]
4.5 [6
6
]
Max. opening operating
Bar [psi]
12 [174]
12 [174]
Opening volume
cm
3
[in
3
]
17 [1.0
4
]
37 [2.2
6
]
Pre-positioning
Mm [in]
6.5 [0.2
6
]
12 [0.47]
Repetition accuracy
Mm [in]
<0.005 [<0.00
02
]
Max. permissible lateral
kN [lbs]
1
0 [
2250
]
20 [449
0
]
Max. operating temperature °C [°F]
8
0 [1
76
]
8
0 [1
76
]
CAUTION:
It must be ensured, by means of a pressure regulation valve for
example, that the maximum operating pressure is not exceeded.
The safety factor is not included in the holding force value. It must
be taken into account individually, depending on the application
concerned.
K
5
.3
1
.5
[
330
]
13
[
2900
]
5 [7
3
]
12 [174]
6
[
.37
]
4
[0.
16
]
5
[
1125
]
8
0 [1
76
]
<0.005 [<0.00
02
]
<0.005 [<0.00
02
]
