90
JensenScandinavia AS All rights reserved 2011
eBOX
User Manual
Case:
11.4.3
STATUS LED is off.
Solution:
1.
Make sure that eBOX is Switched On and connected to the router.
2.
Check that eBOX is not blocked by any firewall, network switch, or router.
Case:
11.4.4
STATUS LED is flashing.
Solution:
Check that eBOX is not blocked by any firewall, network switch or router.
Case:
11.4.5
USB 1/2 LED is off - USB key/Device has not been recognized.
Solution:
1.
Remove the USB key/device.
2.
Wait a few minutes and plug in the USB key/device again.
Case:
11.4.6
USB 1 LED is flashing fast and a long beep is sounded.
Solution:
1.
Check that the USB key has at least 150MB of free storage space.
2.
Check that the number of users in the system does not exceed 10.
If the above steps do not resolve the problem, the eBOX key may be faulty or in read-only
mode and must be replaced, for more information plug in the key to your PC and look for
the eBOX Authentication Report on the USB key.
Case:
11.4.7
USB 2 LED is flashing fast and a long beep is sounded.
Solution: