45
JensenScandinavia AS All rights reserved 2011
eBOX
User Manual
server does not work.
Daylight Savings
eBOX can also take Daylight savings into account. If you wish to use
this function, you must check/click the enable box to set up your
daylight saving configuration (below).
Times From
Select the date in which you wish to start using daylight saving.
Times to
Select the date in which you wish to stop using daylight saving.
Set System Date and
Time
If any time server does not work, you can manually set your
system’s current date and time here. In order to apply these
changes you should type 0.0.0.0 in the Time Server Address bar.
Click <Apply> to save your changes.
5.12.3
Advanced Settings
– Network
Set the IP address of the eBOX manually.
Parameters
Description
Obtain an IP address
automatically
The DHCP server is used to manage the IP address of a network. If
you have a live DHCP server in your network and wish the eBOX to
obtain the IP address from it, please select “Obtain an IP address
automatically.”
Note: According to the settings of your DHCP server, the IP address obtained
from your DHCP server may change from time to time.
