BBDUDBHQBE±3DJHRI
4.5 Leaks
4.6
Dishwasher functions / Software
Fault
Cause
Fault correction
Leakage under heat
exchanger
Expansion opening does not bolt correctly.
Consider the sequence when assembling the heat
exchanger:
•
See also to chapter „ replacing heat
exchanger”
Error E:15 generated from
leakage under water
softener in
FD 9110 ~ 9205.
Minimal leakage in the water softener can generate error
E:15 after many wash cycles.
Change water softener complete:
-
See also to chapter „ replacing water
softener system”
Fault
Cause
Fault correction
After switching on the dish
washer, it begins with ECO
50 programme.
With KI 59 a new software is implemented. The default
“start program” is always ECO, no matter which programme
was chosen in the last washing cycle.
Advise customer: EU-directive (EU1275 / in 2008,
conformance index 011) specify this programming.
Summary of Contents for JDB9600AW
