Jenn-Air JDB9600AW, Technical Education

Page: 71 / 193

BBDUDBHQBE±3DJHRI
3. Discolouration :
4. Streaking on glasses and cutlery
Fault description Cause Remedial action
Coloured (blue, yellow, brown),
shimmering, difficult to remove
to non-removable discolouration
in the container or on the door Film formation consisting of ingredients from vegetables
(e.g. cabbage, celery, potatoes, noodles, ..) or the tap water
(e.g. manganese). Can be partly removed with machine cleaner (mat. no. 311313) or
mechanical cleaning. Mechanical removal with “Vienna chalk”
(mat. no. 311136) usually possible. Coatings are harmless.
Film formation caused by metallic components. Known for silver or
aluminium utensils. Can be partly removed with machine cleaner (mat. no. 311313) or
mechanical cleaning.
Discoloration on plastic parts Wash programme too weak. Select different wash programme;
see Eliminating faults yourself
Too low rinsing temperature. Select programme with higher wash temperature.
Utensils precleaned too intensely; sensors therefore decide on weak
programme sequence. Stubborn soiling cannot be completely removed. Do not prerinse utensils; remove only large food remnants.
Programme recommendation Eco 50°.
Removable streaking on glasses
and cutlery
Glasses with metallic
appearance
Too much rinse-aid. Set rinse-aid amount to lower level;
see Rinse aid
No rinse aid added or setting too low. Add rinse aid and check dosage (recommendation level 4-5);
see Rinse aid
Non-return valve leaking. Check non-return valve for leaks.
Detergent residue in the final rinse. Detergent dispenser cover blocked
by utensils (cover does not open fully). Check detergent dispenser function, detergent cover must not be
obstructed by utensils.
Do not place any utensils or aroma dispensers in the dosing
assistant.
Utensils precleaned too intensely; sensors therefore decide on weak
programme sequence. Stubborn soiling cannot be completely removed. Do not prerinse utensils; remove only large food remnants.
Programme recommendation Eco 50°.