BBDUDBHQBE±3DJHRI
3.26.1 Function
The actuator mechanism for the detergent cover is actuated via a coil.
The coil is actuated via pulses from the power electronics.
When the coil is switched on, the anchor is moved to the left.
The anchor is connected by a plastic lever to the release lever of the
detergent cover. When the actuation lever is turned, the detergent
cover is released and opens.
There is a switching mechanism between the coil anchor and the
rinse-aid valve. The switching mechanism prevents rinse aid from
being metered when the coil is initially actuated.
When the detergent cover is opened, the mechanism switches similar
to a “ballpoint mechanism”. The detergent cover is no longer actuated,
but the dosing pump for rinse aid.
With each pulse 1 ml of rinse aid is dispensed. The setting stage for
the rinse aid corresponds to the pulses and the dispensed amount.
To ensure that the rinse aid container drains, there is a scoop chamber.
This is always filled when the appliance door is fully opened. The rinse
aid flows out of this scoop chamber into the appliance. If the door is
not fully opened, rinse aid may not flow into the appliance because the
scoop chamber was not filled.
A ventilation system is used to equalise the pressure in the dispenser.
If the appliance door is opened, the actuating mechanism is “reset”.
This causes the detergent cover to open first the next time the coil is
actuated.
If there is humidity left in the detergent dispenser and a detergent
tablet is inserted, the tablet begins to dissolve slowly.
2 plastic bars in the dispenser prevent the detergent from “sticking” to
the housing.
1 Coil
3 Anchor with switching mechanism
2 Release lever
4 Dosing pump
Summary of Contents for JDB9600AW
