Jenn-Air JDB9600AW, Technical Education

Page: 67 / 193

BBDUDBHQBE±3DJHRI
1.
Residue on the utensils
Fault description Cause Remedial action
Food remnants or sandy residue Utensils placed too closely together, overfilled. Observe correct arrangement of utensils (arrange according to
Fig. 1 , Fig. 2 and Fig. 3 ).
Spray arm blocked by utensils or cutlery. Arrange utensils so that spray arm can rotate without obstruction.
(arrange according to
Fig. 2
and Fig. 3 );
see Utensils
Utensils precleaned too intensely; sensors therefore decide on weak
programme sequence. Stubborn soiling cannot be completely removed. Do not prerinse utensils; remove only large food remnants.
Programme recommendation Eco 50°.
Filter not locked in the pump sump or incorrectly inserted. Insert and lock filter correctly;
see Maintenance and care
Spray arm nozzles, roof shower head blocked (e.g. lemon pips, etc.). Clean nozzles and roof shower head and insert/lock filter correctly;
see Maintenance and care
Coarse, micro and fine filter dirty. Clean filters;
see Maintenance and care
Spray arm bearings do not move smoothly (dirt around the bearings). Clean parts, show customer how to insert filter correctly.
Spray arm or supply pipe deformed
-> spray arm strikes the basket or the docking site. Replace spray arm.
Waste-water pump blocked. Check waste-water pump;
see Eliminating faults yourself
Dirty water runs back into the appliance -> re-soiling. Check draining, check non-return valve for leaks.
Top basket on right and left not set to same height. Set top basket to same height using side levers.
Utensils unfavourably arranged (very large utensils e.g. pans in the
bottom basket), avoid contact points, prong rows bent. Arrange utensils so that spray jets can reach surface of utensils
(arrange according to
Fig. 2
and Fig. 3 ).
Tall narrow receptacles are not rinsed adequately in the corner area. Do not place tall narrow receptacles too obliquely or in the corner
area (arrange according to
Fig. 2
and Fig. 3 ).