BBDUDBHQBE±3DJHRI
3.15 Pump
sump
The pump sump is illustrated here with all mounted parts.
3.15.1 Covers in the pump sump
The suction cap ensures that the pump has an optimized suction
performance and flow performance. No air or dirt is drawn in. This cap
should not be removed by the customer.
The cover of the drain pump is used to channel the water. Without the
cover the drain pump cannot build up any pressure.
Customers may remove the drain pump cover for cleaning purposes.
If the cover is not correctly attached, the water cannot be pumped out.
1 Aqua sensor (optionally)
3 Suction
cap
2 Drain
pump
cover
1 Drain
pump
5 Water switch (optionally)
2 Connection for lower spray arm
6
Water switch motor with pulse
generator (optionally)
3
Supply pipe connection for roof sprinkler
(optionally)
7 Heating
pump
4 Supply pipe connection for upper spray
arm
Summary of Contents for JDB9600AW
