BBDUDBHQBE±3DJHRI
Fault description
Cause
Remedial action
White, stubborn coatings;
limescale on the utensils,
container or door
Detergent substances are deposited.
These coatings cannot usually be removed with chemicals (appliance
cleaner, ..).
Change detergent brand.
Clean appliance mechanically.
Hardness range incorrectly set or untreated water hardness greater
than 50 °dH.
Check residual hardness in the cleaning and final rinse cycles and
set water softening system according to instructions for use.
Top up salt;
see
Water softening system
Water softening system is not being regenerated.
Check function of the regeneration valve in the customer service
programme.
3in1 detergent or bio/eco detergent not effective enough.
Set water softening system according to instructions for use;
use separate agents (proprietary detergent, salt, rinse aid);
see
Water softening system
Starch deposits on the utensils
Underdosage of detergent (verification with Minilabor mat. no. 340070).
Advise customer; increase detergent dosage, change detergent.
Wrong programme selection (programme too weak) selected.
Advise customer; correct programme selection;
see
Programme overview
Tea or lipstick residue on the
utensils
Too low rinsing temperature.
Select programme with higher washing temperature;
see
Eliminating faults yourself
Too little detergent.
Use suitable detergent at correct dosage.
Utensils precleaned too intensely; sensors therefore decide on weak
programme sequence. Stubborn soiling cannot be completely removed.
Do not prerinse utensils; remove only large food remnants.
Programme recommendation Eco 50°.
Unsuitable
detergent.
Change detergent.
Coloured (blue, yellow, brown),
difficult to remove to non-
removable coatings in the
container or on the door
Film formation consisting of ingredients from vegetables
(e.g. cabbage, celery, potatoes, noodles, ..) or the tap water
(e.g. manganese).
Can be partly removed with machine cleaner (mat. no. 311313) or
mechanical cleaning. Coatings are harmless.
Film formation caused by metallic components. Known for silver or
aluminium utensils.
Can be partly removed with machine cleaner (mat. no. 311313) or
mechanical cleaning.
Summary of Contents for JDB9600AW
