09
DANGER
The actions described below, which obviously cannot cover the entire range of potential
possibilities of “poor use” of the electrically power assisted cycle, are to be considered strictly
prohibited.
• Use the electrically power assisted cycle for uses other than the ones for which it has been
manufactured.
• Ride the electrically power assisted cycle if the rider’s weight exceeds the permitted limit.
• Use the electrically power assisted cycle under the influence of alcohol or drugs.
• Use the electrically power assisted cycle in areas at a risk of fire, explosions or in places with
a corrosive and/or chemically active atmosphere.
• Use the electrically power assisted cycle in adverse weather conditions (heavy rain, hail,
snow, strong wind, etc.).
• Use the electrically power assisted cycle in poorly lit areas.
• Modify the frame or the bike in any way and/or smooth, drill or remove parts of the bike.
• Install incompatible components and/or accessories to avoid compromising the integrity and
robustness of the product.
• Charge the battery in an environment that is either too hot or insufficiently ventilated.
• Cover the battery while its charging.
• Smoke or use open flames near the charging area.
• Perform any type of maintenance work with the battery connected.
• Insert limbs or fingers between the moving parts of the bike.
• Touch the brakes immediately after use due to high temperatures.
• Allow the electric and electronic components of the electrically power assisted cycle to come
into contact with water or other liquids.
• Modify or change the bike and its mechanical and electronic parts in any way to avoid the risk
of structural damage, compromising efficiency and causing damage.
If any factory defects, unusual noises or faults are detected, do not ride the vehicle and contact
your authorised dealer or visit the website
www.jeepurbanemobility.com/en/support/
