Jeep 2014 Wrangler Operating Information Manual Download Page 446

Page: 446 / 676

OFF-ROAD DRIVING TIPS

Side Step Removal — If Equipped

NOTE:

Prior to off-road usage, the side steps should be

removed to prevent damage.

1. Remove the two nuts from the bodyside.

2. Remove one bolt from the underside of the vehicle.

3. Remove the side step assembly.

Bodyside Nut

Underside Bolt

444

STARTING AND OPERATING

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands