Jeep 2014 Wrangler Operating Information Manual Download Page 164

Page: 164 / 676

1. Lift the seatback release lever and fold the seatback

forward.

2. Slowly flip the entire seat forward.

3. Return the seat to the normal position.

4. Raise the rear seatback using the assist strap and

firmly lock the seat into position.

Rear Seat Release

Folding Rear Seat

162

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands