Jeep 2014 Wrangler Operating Information Manual Download Page 244

Page: 244 / 676

Raising The Soft Top

1. Unclip and move the sun visors to the side.

2. Install door frames, if removed. Refer to “Door Frame”

in this section for further information.

3. Make sure the plastic sleeve is slid over Sunrider® link

(Sunrider® Models only).

4. Standing on the side of the vehicle, lift the top by the

side bow and the 2–bow (middle bow) up and over the
sports bar until the header rests on the top of the
windshield frame.

242

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands