Jeep 2014 Wrangler Operating Information Manual Download Page 214

Page: 214 / 676

4. Remove the six Torx® head screws that secure the

hard top to the vehicle (along the interior bodyside)
using a #40 Torx® head driver.

5. Open the swing gate all the way to ensure clearance of

the rear window glass. Lift the rear window glass.

6. Locate the wire harness on the left rear inside corner of

the vehicle.

Wire Harness Connector

212

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands