Jeep 2014 Wrangler Operating Information Manual Download Page 200

Page: 200 / 676

6. Remove the soft top bow assembly pivot bracket bolts

(two per side) from the sport bar using a 10.0 mm
wrench or socket driver.

7. Lift the soft top in a upward motion to release the

pivot bracket from the sport bar bracket.

8. Remove the soft top from the vehicle and store in a

clean, dry location (another person may be needed to
help with this operation).

NOTE:

If you are doing this alone, use one arm to hold

the bundle up, the other to remove the brackets.

198

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands