Jeep 2014 Wrangler Operating Information Manual Download Page 269

Page: 269 / 676

5. Before unzipping the rear window, release the first 3 in

(7.6 cm) of both sail panels from the channel. Remove
the swing gate bar by pulling it straight rearward out
of the swing gate brackets.

•

Unzip the rear window starting at the right lower
corner of the window. Pull the zipper up, across the
top and down to the left lower corner.

Zipper pulls

will stay on the rear window.

Pull down on the rear

window to disengage it from the zipper on the top
cover.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

267

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands