Jeep 2014 Wrangler Operating Information Manual Download Page 277

Page: 277 / 676

5. Insert the slider feature of the knuckles into the door

frame tracks and slide the top forward.

6. Ensure that the top locks into the Sunrider® locking

mechanisms that are located above the front of the rear
doors.

7. Unclip and move the sun visors to the side.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

275

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands