Jeep 2014 Wrangler Operating Information Manual Download Page 239

Page: 239 / 676

6. Remove the rear window retainer from the swing gate

bracket on both the left and right sides.

7. Stow the windows carefully to avoid scratching.

8. Undo the Velcro® that runs along the top and rear edge

of the side window.

9. Beginning from the rear lower corner, completely

unzip the window.

10. Once unzipped, remove the side window retainers

from the door channel and body side channel. Repeat
this step on the opposite side.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

237

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands